Custom Label

Automatic labeling machines help manufacturers improve packaging efficiency and maintain consistent label placement. However, even well-printed labels may cause problems on a production line if the roll specifications do not match the labeling equipment. Before ordering custom roll labels, it is important to confirm the core diameter, maximum roll diameter, label dimensions, gap, unwind direction, and other technical requirements with your label supplier. This guide explains the key specifications to prepare before placing an order for roll labels used in automatic labeling machines. 1. Why Roll Label Specifications Matter Automatic labeling machines rely on consistent label positioning and smooth label feeding. Incorrect roll specifications can lead to feeding interruptions, inaccurate label placement, liner breaks, or unnecessary production downtime. Providing complete specifications before production helps your label supplier manufacture rolls that are more compatible with your equipment and application. 2. Six Key Specifications to Confirm 2.1 Core Diameter The core diameter refers to the inside diameter of the cardboard or plastic tube around which the labels are wound. Common core diameters include 25 mm, 40 mm, and 76 mm, although requirements vary by machine and application. Always check your equipment manual or confirm the required core size with your machine manufacturer before ordering. A roll with an incompatible core may not fit securely onto the label holder. 2.2 Maximum Roll Diameter The maximum roll diameter is the outside diameter of the finished label roll. A larger roll can hold more labels and reduce the frequency of roll changes. However, it must fit within the machine's roll holder and available operating space. Before production, confirm the maximum permitted roll diameter with your equipment supplier. The finished roll diameter will depend on the label construction, liner thickness, label dimensions, and quantity per roll. 2.3 Label Size and Gap Label dimensions must match the packaging design and application requirements. Label width and length: Confirm the finished label dimensions, including the correct orientation on the roll. Label gap: Specify the distance between adjacent labels on the release liner. Repeat length: For labels arranged in a continuous sequence, confirm the pitch from one label's leading edge to the next. The gap and repeat length can affect the machine's label sensor and dispensing accuracy. Follow the equipment manufacturer's requirements, especially when using transparent labels or labels with irregular shapes. 2.4 Unwind Direction Unwind direction describes how the labels are oriented as they come off the roll. For example, the label may be dispensed with the top edge first or the bottom edge first. The correct direction depends on the labeling machine, the position of the label applicator, and the orientation required on the final package. A roll with the wrong unwind direction may feed correctly but apply labels upside down or in an unsuitable orientation. When possible, provide your supplier with the machine's unwind-direction diagram or a reference image showing how the label should come off the roll. 2.5 Labels per Roll The number of labels per roll affects roll size, changeover frequency, packaging, and transportation. More labels per roll can reduce interruptions for roll replacement, provided the finished roll stays within the machine's diameter and weight limits. When determining the quantity per roll, consider: The maximum roll diameter allowed by the machine The weight that operators can safely handle The packaging and transportation requirements The expected production volume and roll-change frequency Your label supplier can estimate the appropriate quantity after reviewing the label size, material construction, core diameter, and maximum roll diameter. 2.6 Label Material and Adhesive Label material and adhesive should suit both the container and the application environment. Common face materials include coated paper, synthetic paper, and BOPP film in transparent, white, or metallic finishes. When selecting materials, consider: The surface material of the container, such as glass, PET, PE, or PP Whether the container is curved, squeezable, or irregularly shaped Exposure to moisture, refrigeration, oil, or other environmental conditions The container's surface cleanliness and temperature during application For example, transparent film labels may require specific sensor settings on an automatic labeling machine. Certain containers may also need adhesives formulated for low-surface-energy plastics or cold-temperature applications. Material selection should be confirmed through application testing whenever possible. 3. Common Problems Caused by Incorrect Roll Specifications Label Feeding Problems An incompatible core diameter, excessive roll diameter, or unsuitable roll construction can prevent the roll from fitting or feeding correctly. Solution: Confirm the machine's permitted core size, maximum roll diameter, and roll weight before production. Inaccurate Label Positioning Incorrect label gaps, repeat lengths, or sensor settings may cause labels to be applied inconsistently. Solution: Confirm the required label pitch and gap, and test sensor compatibility with the actual label material. Labels Applied in the Wrong Orientation An incorrect unwind direction can result in labels being applied upside down or with the design facing the wrong way. Solution: Approve the unwind direction using a machine diagram or physical reference before mass production. Label Wrinkles or Poor Adhesion Wrinkles and lifting edges may result from unsuitable adhesive, container contamination, incorrect application pressure, or mismatched label dimensions. Solution: Check the material and adhesive against the actual container and application conditions. Conduct a trial run before full production. 4. What Information Should You Send Your Label Supplier? To help your supplier evaluate your requirements and prepare an accurate quotation, provide the following information: Label dimensions and shape Label material and adhesive requirements, if known Quantity per order and preferred quantity per roll Core diameter and maximum roll diameter Unwind direction Label gap or repeat length, if specified by the machine Container material and dimensions Labeling machine model or a reference diagram Artwork file, preferably in AI or print-ready PDF format If you do not know all the technical specifications, start by providing the machine model, a photo of the existing label roll, and the label dimensions. Your supplier can help identify which details need further confirmation. 5. Frequently Asked Questions What is the standard core diameter for roll labels? There is no single standard that fits every labeling machine. A 76 mm core is commonly used in industrial label rolls, while smaller cores are used in some applications. Always confirm the required size with your equipment manufacturer. How many labels should be wound onto each roll? The quantity depends on the label dimensions, material thickness, core diameter, maximum roll diameter, and machine requirements. Your supplier can estimate the suitable quantity based on these details. Can transparent labels be used on automatic labeling machines? Yes. However, transparent labels may require compatible sensors or a different detection method. Confirm the machine's sensor capabilities and test the actual label construction before mass production. Can I order roll labels if I do not know the unwind direction? Yes, but the direction should be confirmed before mass production. A photo of the existing roll, the machine's setup diagram, or a reference from the equipment manufacturer can help determine the correct configuration. Conclusion Preparing the correct roll label specifications is an important step toward smooth automatic labeling. Core diameter, maximum roll diameter, label size, gap, unwind direction, roll quantity, and material compatibility should all be reviewed before production. At JINKE Label, we manufacture custom self-adhesive labels in different materials, sizes, and roll configurations for a range of packaging applications. Need roll labels for your automatic labeling machine? Send us your label dimensions, estimated quantity, material requirements, and machine specifications. Our team can help review the details and provide a quotation based on your application. Contact us at www.jinkelabel.com to discuss your label requirements.

With the rapid development of smart manufacturing and logistics tracking, RFID labels (Radio Frequency Identification) are becoming a vital upgrade to traditional pressure-sensitive labels. Compared to barcodes, RFID technology offers contactless identification, simultaneous reading of multiple tags, and higher efficiency in industries like warehousing, retail, and healthcare. As a professional pressure-sensitive label manufacturer, we are actively exploring and embracing this trend. What is RFID? As a dedicated label manufacturer, we’ve seen growing demand for smart labels that integrate seamlessly with modern IoT systems. RFID adhesive labels are exactly that: a bridge between traditional labeling and digital intelligence. They combine the strong adhesion and customizable nature of pressure-sensitive labels with advanced data collection capabilities. RFID offers several significant advantages: Contactless Reading: No need for alignment or direct scanning Longer Reading Distance: Several meters or more Bulk Reading: Multiple tags can be read at once, improving speed Larger Data Capacity: Tags can store more information and are often rewritable High Resistance to Harsh Environments: Performs well even in dusty or oily conditions The Power of RFID-Enabled Pressure-Sensitive Labels By integrating RFID chips into pressure-sensitive labels, we combine the practical benefits of adhesive labels with the intelligence and automation of RFID technology. These “smart labels” offer significant benefits across a range of industries: Warehouse & Logistics: Real-time inventory tracking and faster check-in/check-out processes Retail & Anti-counterfeiting: Accurate product traceability and authenticity verification Healthcare Management: Automated tracking of pharmaceuticals and test reagents to ensure safety Manufacturing: Transparent production tracking for improved quality control What We Offer As a label manufacturer with advanced printing and converting equipment, we offer custom label solutions, including: Various chip types (UHF, HF, etc.) Multiple face materials and adhesives suitable for different environments Dual encoding with barcodes + RFID Small sample runs and large-scale production support Smart labeling is undoubtedly the future. If you're considering RFID labels for your business, feel free to contact us to learn more about our capabilities and services.